Hello Machine Bros!
In this article, we will show you how to 3D print five articulated models you can download for free! A monarch butterfly, a shark, a red-eyed crocodile skink, a centipede and a snake
Information About the 3D Models
- Where to download the models:
- Models Price: Free (But if you can, support the designers with a tip)
- Designers:
- Number of pieces to 3D print: 5
3D Printing Parameters
These are the parameters common parameters used to 3D print the 5 pieces, later you will find the unique parameters for each piece:
- 3D Printer: Creality Ender 3
- Nozzle: 0.4mm
- Layer Height: 0.16 mm
- Superior solid layers: 10
- Inferior solid layers: 6
- Perimeters: 2
- Infill: Rectilinear 15%
- Filament: PLA
- Bed temperature: 75°C (167°F) until layer # 10, then 65°C (149°F) the rest of the print
- Extruder temperature: 210°C (410°F)
- Layer fan speed %: Off in the first layer, then 100% the rest of the print
- Printing speed: 3600 mm/min
Monarch
- Support: No
- Additions: No
- Scale: 100 %
- Build time: 3 hours 55 minutes
- Filament length: 14066.9 mm
- Plastic weight: 42.29 g (0.09 lb)
Shark
- Support: No
- Additions: No
- Scale: 100%
- Build time: 3 hours 44 minutes
- Filament length: 11473.8 mm
- Plastic weight: 34.50 g (0.08 lb)
Red Eyed Crocodile Skink
- Support: No
- Additions: Brim (Custom)
- Scale: 100%
- Build time: 8 hours 10 minutes
- Filament length: 26279.9 mm
- Plastic weight: 79.01 g (0.17 lb)
Centipide
- Support: No
- Additions: No
- Scale: 100%
- Build time: 8 hours 16 minutes
- Filament length: 22231.0 mm
- Plastic weight: 66.84 g (0.15 lb)
Snake
- Support: No
- Additions: Brim
- Scale: 140%
- Build time: 11 hours 7 minutes
- Filament length: 35369.9 mm
- Plastic weight: 106.34 g (0.23 lb)
If you have any questions about how to 3D print these articulated models, leave them in the comments section and we will help you!
Also if you want to see other models in Time Lapse, do not hesitate to comment.
Until the next one Machine Bros!
