Hello Machine Bros!
Do you want to know how to 3D print this amazing model of a Plague Doctor? We will give you all the necessary information to 3D print it!
Information About the 3D Model
- Where to download the model: MyMiniFactory
- Model price: $3.50
- Designer: TytanTroll Miniatures
- Number of pieces to 3D print: 4 (Doctor, harm mask and joint)
| Note: The model was divided in 4 to make it easier to 3D print. |
3D Printing Parameters of the Plague Doctor
These are the parameters common parameters used to 3D print the 4 pieces, later you will find the unique parameters for each piece:
- 3D Printer: Creality Ender 3
- Nozzle: 0.4mm
- Layer Height: 0.12mm
- Superior solid layers: 7
- Inferior solid layers: 6
- Perimeters: 4
- Filament: PLA
- Bed temperature: 75°C (167°F) until layer # 10, then 65°C (149°F) the rest of the print
- Extruder temperature: 210°C (410°F)
- Layer fan speed %: Off in the first layer, then 100% the rest of the print
- Printing speed: 2400mm/min
- Scale (%): 200%
Doctor
- Infill: Triangular 30%
- Support: Yes
- Additions: Brim
- Build time: 65 hours 2 minutes
- Filament length: 164907.9 mm
- Plastic weight: 495.81 g (1.09 lb)
Hat
- Infill: Triangular 30%
- Support: Yes
- Additions: Brim (Personalized)
- Build time: 10 hours 48 minutes
- Filament length: 25099.5 mm
- Plastic weight: 75.46 g (0.17 lb)
Mask
- Infill: Triangular 30%
- Support: Yes
- Additions: Brim
- Build time: 6 hours 11 minutes
- Filament length: 10168.7 mm
- Plastic weight: 30.57 g (0.07 lb)
Joint
- Infill: Triangular 30%
- Support: No
- Additions: Brim
- Build time: 1 hour 36 minutes
- Filament length: 3500.8 mm
- Plastic weight: 10.53 g (0.02 lb)
Plague Doctor Printing Pictures
If you have any questions about this 3D print of the Plague Doctor, leave it in the comments section and we will gladly help you!
Also if you want to see other models in Time Lapse, do not hesitate to comment.
Until the next one Machine Bros!
