Hello Machine Bros!
Do you want to know how to 3D print this amazing model of a Flying Sea Turtle? In this article, we will give you all the necessary information to 3D print it!
Information About the 3D Model
- Where to download the model: Thingiverse
- Designer: Amao Chan
- Model price: Free (But if you can, support the designer giving a tip)
- Number of pieces to 3D print: 5 ((Base) FT09-NEW, (Crankshaft) FT05-1y2-NEW, (Gears) FT-GEAR01-2-3, (Parts) FT02-3-4-6-7-8, (Turtle) FT01)
3D Printing Parameters of the Flying Sea Turtle
These are the common parameters used to 3D print the 5 parts, later you will find the unique parameters for each part:
- 3D Printer: Creality Ender 3
- Nozzle: 0.4mm
- Layer Height: 0.12mm
- Superior solid layers: 7
- Inferior solid layers: 6
- Perimeters: 4
- Filament: PLA
- Bed temperature: 70°C (158°F) until layer # 10, then 60°C (140°F) the rest of the print
- Extruder temperature: 190°C (374°F)
- Layer fan speed %: Off in the first layer, then 100% the rest of the print
- Printing speed: 3000mm/min
- Scale (%): 100%
(Base) FT09-NEW
- Infill: Rectilinear 20%
- Support: No
- Additions: No
- Build time: 5 hours 47 minutes
- Filament length: 15222.0 mm
- Plastic weight: 45.77 g (0.10 lb)
(Crankshaft) FT05-1y2-NEW
- Infill: Full Solid Diaphragm
- Support: Yes
- Additions: No
- Build time: 3 hours 48 minutes
- Filament length: 6319.1 mm
- Plastic weight: 19.00 g (0.04 lb)
(Gears) FT-GEAR01-2-3
- Infill: Full Solid Diaphragm
- Support: Yes
- Additions: No
- Build time: 4 hours 40 minutes
- Filament length: 8900.7 mm
- Plastic weight: 26.76 g (0.06 lb)
(Parts) FT02-3-4-6-7-8
- Infill: Full Solid Diaphragm
- Support: Yes
- Additions: Brim (Personalized)
- Build time: 6 hours 15 minutes
- Filament length: 9782.6 mm
- Plastic weight: 29.41 g (0.06 lb)
(Turtle) FT01
- Infill: Rectilinear 20%
- Support: No
- Additions: No
- Build time: 8 hours 20 minutes
- Filament length: 18369.0 mm
- Plastic weight: 55.23 g (0.12 lb)
Flying Sea Turtle 3D Printing Pictures
If you have any questions about this 3D print of the Flying Sea Turtle, leave it in the comments section and we will gladly help you!
Also if you want to see other models in Time Lapse, do not hesitate to comment.
Until the next one Machine Bros!
