Home3D Models3D Print - Among Us

3D Print – Among Us

ORANGE IS SUS!!!!111!
Do you want to know how to 3D print the astronauts from Among Us? In this article, we will give you all the necessary information to 3D print them!

Information about the 3D Model

  • Where to download the model: Thingiverse
  • Designer: Al Pokemon
  • Model price: Free
  • Number of pieces to print: 5 (Head, legs, visor, guts & bone)

Model in the slicer Simplify3D

In the next video you will find the complete slicer configuration used to print the 3D model:

  • Support position
  • Model location on the printing bed
  • Inclination of the model on the printing bed
  • Information on the scale used
  • 3D print process preview

3D Printing Parameters of Among Us

These are the common parameters used to print the 5 parts. Later, you will find the unique parameters for each part:

Note: All the 5 parts were 3d printed at the same time.
  • 3D Printer: Creality Ender 3 V2
  • Nozzle: 0.4
  • Layer Height: 0.1
  • Superior solid layers: 7
  • Inferior solid layers: 6
  • Perimeters: 3
  • Filament: PLA
  • Bed temperature: 70°C (158°F) until layer # 10, then 60°C (140°F) the rest of the print
  • Extruder temperature: 190
  • Layer fan speed %: Off in the first layer, then 100% the rest of the print
  • Printing speed: 3000mm/min
  • Scale (%): 100%
  • Build time: 7 hours 23 minutes
  • Filament length: 11101.5 mm
  • Plastic weight: 33.38 g (0.07 lb)

Head

  • Infill: Fast Honeycomb 10%
  • Support: No
  • Additions: No

Legs

  • Infill: Fast Honeycomb 20%
  • Support: Yes
  • Additions: Brim

Visor

  • Infill: Fast Honeycomb 60%
  • Support: No
  • Additions: Brim

Guts

  • Infill: Fast Honeycomb 60%
  • Support: No
  • Additions: No
Among Us Astronauts Guts!
Among Us Astronauts Guts!

Bone

  • Infill: Fast Honeycomb 60%
  • Support: No
  • Additions: Brim

Among Us 3D Printing Pictures

Among Us 3D Prints
Among Us 3D Prints – In painting process
The astronauts from Among Us
3D Prints from Among Us
Orange is sus!
Green and Orange are sus!
The Astronauts fromAmong Us!
The Astronauts fromAmong Us!

These 3D models are mazing! we had much fun playing with them while taking the pictures! We hope you like them.

If you have any questions about these 3D prints from Among Us, leave them in the comments section and we will gladly help you!

Also if you want to see other models in Time Lapse, do not hesitate to comment!

Until the next one Machine Bros!

OTHER 3D MODELS WITH TIME LAPSE

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisment -

Latest Articles